SECTION IV:  SUPERCONDUCTING CYCLOTRON, INSTRUMENTATION AND RIB UPGRADE

 

K500 operations and development
D. P. May, G. J. Kim, B. T. Roeder, H. L. Clark, and F. P. Abegglen

Axially-mounted, high-temperature oven for ECR2
F. P. Abegglen, H. Peeler, and D. P. May

Texas A&M cyclotron radiation effects facility April 1, 2013 – March 31, 2014
H. L. Clark, J. Brinkley, L. Chen, G. Chubarian, V. Horvat, B. Hyman, B. Roeder, and G. Tabacaru

Cyclotron computing
R. Burch and K. Hagel

Progress on the light ion guide project
G. Tabacaru, J. Arje, H. L. Clark, and D. P. May

Computer controlled gas system for the H- and ECR ion sources
L. Chen and H. L. Clark

Cyclotron Institute upgrade project
H. L. Clark, F. Abegglen, J. Arje, G. Chubaryan, G. Kim, D. P. May, B. Roeder, and G. Tabacaru

Restoration of beta-decay events that have occurred during the detection system’s dead time
V. Horvat and J. C. Hardy

Automatic degrader changer
M. Bencomo and J. C. Hardy

Beam diagnostic stations for the TAMUTRAP beamlines
R. S. Behling, B. Fenker, M. Mehlman, D. Melconian, and P. D. Shidling

Transport efficiency of injection optics and RFQ of the TAMUTRAP facility
R. S. Behling, B. Fenker, M. Mehlman, D. Melconian, and P. D. Shidling

Upgrades and status of the 37K β-asymmetry experiment
R. S. Behling, B. Fenker, M. Mehlman, D. Melconian, and P. D. Shidling

Compilation of beams produced with MARS
E. Simmons, R. E. Tribble, and RET group members past & present

Detector developments for SAMURAI silicon tracker
A. Saastamoinen, M. McCleskey, B. T. Roeder, R. E. Tribble, L. G. Sobotka, and C. Rasco

Development of a new MARS simulation in LISE++
B. T. Roeder and O. B. Tarasov

Development of AstroBox2 detector
A. Saastamoinen, B. T. Roeder, A. Spiridon, R. E. Tribble, E. Pollaco, L. Trache, and G. Pascovici

Update on the upgrade of the Oxford detector – part 1
A. Spiridon, R. Chyzh, M. Dag, E. McCleskey, M. McCleskey, B. T. Roeder, A. Saastamoinen, R. E. Tribble, L. Trache, E. Pollacco, and G. Pascovici

Upgrade for the Oxford detector - part 2
R. Chyzh, A. Spiridon, V. Z. Goldberg, M. Dag, M. McCleskey, and R. E. Tribble

Preparation of Gd and Cd targets at Texas A&M University
T. A. Werke, D. A. Mayorov, M. M. Frey, and C. M. Folden III

Commissioning of a rotating wheel target for use in heavy element studies
D. A. Mayorov, L. D. Fields, and C. M. Folden III

Characterization of a gas stopper for heavy element chemistry studies
M. C. Alfonso, E. E. Tereshatov, D. A. Mayorov, T. A. Werke, and C. M. Folden III

Decay detector calibration and signal timing with oxford gas detector
J. Button, Y. Xu, Y. -W. Lui, and D. H. Youngblood

Construction of active target detector for experiments with rare isotope beams
G. V. Rogachev, E. Koshchiy, and E. Pollacco

FAUST upgrade for experimental proton-proton correlation functions
L. Heilborn, A. B. McIntosh, M. Youngs, K. Hagel, L. Bakhtiari, P. J. Cammarata, M. Chapman, J. Mabiala, L. W. May, A. Zarrella, and S. J. Yennello

Design, fabrication and upgrades to the SPiRIT TPC target mechanism
A. B. McIntosh, C. Richers, M. Youngs, and S. J. Yennello

Suitability study of the quadrupole triplet spectrometer (QTS) for selecting complete fusion residues in heavy ion collisions
A. B. McIntosh, L. Heilborn, M. Youngs, L. A. Bakhtiari, P. J. Cammarata, M. Chapman, K. Hagel, J. Mabiala, L. W. May, A. Zarrella, and S. J. Yennello

Pionic fusion at TAMU
A. Zarrella, A. Bonasera, P. Cammarata, L. Heilborn, J. Mabiala, L. W. May, A. B. McIntosh, M. Youngs, and S. J. Yennello

Development and initial commissioning of the FAUST-QTS experimental beam line
P. Cammarata, A. B. McIntosh, M. B. Chapman, G. A. Souliotis, L. Bakthiari,
S. Behling, G. Bonasera, L. A. Heilborn, K. Hagel, Z. Kohley, J. Mabiala, L. W. May, A. Raphelt, M. D. Youngs, A. Zarrella, and S. J. Yennello

Remote control and monitoring system for the FAUST-QTS beam line
M. B. Chapman, P. Cammarata, S. Behling, and S. J. Yennello

Improved particle identification with the FAUST array
M. B. Chapman, P. Cammarata, S. Behling, and S. J. Yennello